====== Forewords ======

----
** Flash a new bootloader or firmware AT YOUR OWN RISKS, be aware that you can bricked your nas. Un-bricking can in the best case be achieved thanks to a serial console but can require a JTAG access.**

I have developped this NAS oriented openWRT based firmware with:
  * Linux Kernel 3.0.4 (thanks to Tobias Waldvogel) 
  * NFS/SAMBA/RSYNC/USHARE servers
  * LUCI web user interface 
  * USB/HARD DISK external boot
  * optional packages

====== Packages and Images ======
OpenWRT packages and images repository
^  Version  ^  Location  ^  Packages  ^
| Trunk | http://opengemini.free.fr/openwrt/trunk/cs351x/ | [[http://opengemini.free.fr/openwrt/trunk/cs351x/packages|Packages]] |

====== Install OpenWRT (packaged per vendor upgrade) ======

Use these images to install OpenWRT for the first time on your device.
Download an appropiate image from\\ the repository and go through your vendor normal firmware upgrade.

^  Brand  ^  Product  ^  File  ^  Test  ^
| Planex  and clones\\ \\ Edimax |  MZK-NAS01SG  | [[http://opengemini.free.fr/openwrt/trunk/cs351x/images-planex-mzknas2openwrt.bin|images-planex-mzknas2openwrt.bin]] |  OK  |
| ::: |  MZK-NAS02SG  | ::: | ::: |
| ::: |  NS-250X  | ::: | ::: |
| Mvixusa |  MvixBOX\\ WDN-2000  | [[http://opengemini.free.fr/openwrt/trunk/cs351x/images-mvixusa2openwrt-mbox_v1.4.bin|images-mvixusa2openwrt-mbox_v1.4.bin]]\\ install from WEB page you get when there are no HDD's in the unit|  OK  |
| Raidsonic IcyBox |  IB-NAS4210B  |  |  Ongoing |
| ::: |  IB-NAS4220B  |  | Ongoing |

| {{:openwrt:planex2openwrt_firmware_upgrade.png?300|}} | {{:openwrt:mvixbox2openwrt.png?300|}} |
| {{:openwrt:edimax2openwrt.png?300|}} | ::: |
| {{:openwrt:icybox2openwrt.png?300|}} | ::: |

====== Upgrade OpenWRT firmware from Luci web interface (sysupgrade) ======
If required, use **sysupgrade images** for a device ALREADY running OpenWRT
^  Brand  ^  Product  ^  File  ^  Test  ^
| Planex  and clones\\ \\ Edimax | MZK-NAS01SG | [[http://opengemini.free.fr/openwrt/trunk/cs351x/openwrt-cs351x-mzknas-sysupgrade.bin|openwrt-cs351x-mzknas-sysupgrade.bin]] |  OK  |
| ::: |  MZK-NAS02SG  | ::: | ::: |
| ::: |  NS-250X  | ::: | ::: |
| Mvixusa |  MvixBOX\\ WDN-2000  | [[http://opengemini.free.fr/openwrt/trunk/cs351x/openwrt-cs351x-mvixbox-sysupgrade.bin|openwrt-cs351x-mvixbox-sysupgrade.bin]] |  OK  |
| Raidsonic IcyBox |  IB-NAS4210B  |  | Ongoing  |
| ::: |  IB-NAS4220B  |  | Ongoing  |


====== Enjoy OpenWrt =======
Because not everyone has a runing DHCP server at home, I made the default IP addresses static
<code>first ethernet : 192.168.1.250
second ethernet : 192.168.2.250 (for systems like the Planex MZK-NAS02SG with dual gigabit)</code>
Also, I disabled firewalling and ethernet bridging by default because a NAS is not meant for that in a local network

{{:openwrt:openwrt-system.png?800|}}
====== Revert from OpenWRT to the original vendor firmware  ======
I provided images to flash from the Openwrt web interface to get back to a vendor state.
^  Brand  ^  Product  ^  File  ^  Test  ^
| Planex  and clones | MZK-NAS01SG | [[http://opengemini.free.fr/openwrt/trunk/cs351x/images-openwrt2planex-mzknas.bin|images-openwrt2planex-mzknas.bin]] |  OK  |
| ::: |  MZK-NAS02SG  | ::: | ::: |
|  Edimax |  NS-250X  | [[http://opengemini.free.fr/openwrt/trunk/cs351x/images-openwrt2edimax-ns250x.bin|images-openwrt2edimax-ns250x.bin]]\\ once re-flashed the default NAS IP is 192.168.1.250\\ (change your subnet!) |  OK  |
| Mvixusa |  MvixBOX\\ WDN-2000  | [[http://opengemini.free.fr/openwrt/trunk/cs351x/images-openwrt2mvixusa.bin|images-openwrt2mvixusa.bin]] |  OK  |
| Raidsonic IcyBox |  IB-NAS4210B  |  | Ongoing  |
| ::: |  IB-NAS4220B  |  | Ongoing  |